Tag Archives: China Welding

Face of HD video caused by network monitoring product development boom, traditional analog surveillance equipment appears to have been declining gradually, but it is not. On the current situation in terms of the overall application is still about 90 percent of the system uses an analog product, analog control system is still an important market, and its acceleration may be slow, but always maintain a certain amount of growth, and Overall, it continues to move to enhance image quality, adapt to a variety of industry applications direction.
Horizontal resolution of 650TVL (color)

HD monitor is the main theme of the entire security industry, and in the analog world, as technology advances, the number of indicators are also camera line rising, 480TVL, 540TVL (color mode) now has close to 650TVL (color mode), 700TVL (black and white mode) limit. For example, Sony recently introduced the new SSC-N21 hemisphere with a high sensitivity 1 / 3 inch ExviewHADCCDII, horizontal resolution of 650TVL, get clear and sharp image detail. Meanwhile, the bolt SSC-G113 / 8 also used ExviewHADCCDII high sensitivity CCD, 650TVL high resolution images can be output, equipped with electronic color to black features and ATRLite wide dynamic capabilities can be applied in a variety of environments with ease.

In addition, the Panasonic with the fifth generation of super-wide dynamic technology development WV-CP500 Series 650 line of ultra-high-definition video camera into the dark zone automatic compensation technology to backlight conditions in sharper images; also carry a smart move i-VMD object detection technology, which allows packet loss / drop packet detection and alarm, the direction of moving object detection and alarm, spray detection alarm, focus offset detection alarm and so on.

Department of products in Korea, LG Electronics, the latest self-developed third-generation XDI-Ⅱ smart chip to handle high-quality images from 520/610K sensor in order to ensure 650TV line resolution, its key technologies, including improved image simulation WDR extended range from 60dB to 68dB, WDR, and enhance the performance of the ACE (Adaptive Contrast Enhancement), while the new 3D-DNR (Digital Noise Reduction) reduces the noise and similar engine as the cumulative weight, making it ideal for low lighting control.

China Welding

It must be recognized that high-definition monitor is a systematic project, not only to achieve front-end high-definition imaging, which still accounts for the mainstream market in terms of analog control and build a complete HD system still has some problems to be solution, such as high-definition transmission, high-definition display, which require high-definition video camera with the matching front-end equipment to support.

Million high-definition, rise through the fog lens

In response to the rapid development of high-definition process, the lenses also made a higher demand, not only require high-resolution power, but also requires a high degree of chromatic aberration. To this end, both corresponding to the 650-line analog high-definition video camera, or IP surveillance cameras should megapixels, different manufacturers have launched their own high-definition camera products.

By Dragon Optical (Shanghai) Co., Ltd., for example, their latest IR corresponding large diameter manual zoom lens corresponding to the 650 line high resolution camera, through the use of aspherical lenses, LD (low dispersion) lens and excellent optical design structure to achieve a horizontal resolution of more than 650 high-definition line. To minimize dispersion, which in addition to the use of high-tech optical lens design, affect the quality of the lens to prevent the occurrence of reflex, the also use the composite coating technology, for very few high-definition video Phantom flares .

For IP network cameras has been plagued by an image quality problem – how to deal with near-infrared light to enhance the domain of image quality, for which, in the Dragon class megapixels IR corresponding manual zoom lens products, based on the non-spherical lens and Tamron high-quality coating technology, the product also uses the latest optical design to achieve a global aberration correction, making the area in the near-infrared light can also be sharp imaging, from visible to near infrared region corresponding to 300 million pixels able to maintain performance, in order to achieve the quality requirements of all-weather monitoring HD1080P.
In addition, some manufacturers of outdoor telephoto lens to monitor distance, image stabilization performance, and ability through the fog have made further improved. To achieve the function of the lens through the fog, in general, can be used to compensate for optical compensation and mechanical surface visible and infrared imaging differences between the two methods, to ensure that all can take advantage of the light is correctly focused to the imaging surface. As the most representative of Fujinon lenses D32 and D60 through the fog products, which make full use of a special optical lens, significantly increasing the flux of the EBC broadband multi-layer coating technology, supporting the mirror assembly of the body lens group accurate and more than a dozen films smooth movement of precision processing technology, and accurate and can be any of the motor control software technology to meet the night, through fog, image stabilization and other needs of a wide variety of purposes.

Electric golf cars

PTZ Camera colorful

With the continuous expansion of surveillance applications, for a variety of nighttime environment, poor conditions and long-distance, large-scale real-time monitoring applications (such as: forests, coastal defense, railways, etc.) integrated outdoor PTZ cameras there is a clear market-based needs. In addition to the general vertical models, in recent years, installed in the vehicle at the top of the car-based head models are also more and more, however, to really meet the requirements of such a complex environment is not an easy task, a to in order to prevent outside moisture, rain, acid etching of the product itself, the device should have high internal airtight, resistant to violence, shock, corrosion, weather is good (within built-in heat shield components) , protection class of at least IP66; secondly in order to ensure accurate location tracking, and reduce the demand for regular maintenance, performance PTZ camera also requires more accurate, robust, more stable.

More importantly, in order to improve the monitoring of the effect at night, some of the advanced night vision technology has been introduced into this area in the past. For example, Changzhou Ming King Electronics Co., Ltd. has developed a series of integrated intelligent high-speed PTZ cameras, including the use of infrared technology (IR LED lights on one side is the side of the camera), laser synchronization (the side of the laser generator, and intelligent servo function), and thermal imaging (infrared imager on one side is the side of the camera, and video can be switched between the two), etc., to meet different application requirements.

In order to achieve better overall performance, some manufacturers of products in this category of camera selection, design excellence, and strive to provide users with quality products. For example, VIEDOTEC launch high-speed integrated camera positioning systems, set the camera, high speed PTZ and decoder in one, can be used with thermal imaging devices, and the use of germanium glass to enhance the infrared transmittance; or plug-in infrared LED lights to improve image quality at night, and also provides IP network-based integrated positioning system, outdoor surveillance cameras have greatly enriched the type of product.

Conclusion

On the future development, web applications will be the trend, rising analog control products in the same technical indicators, need to face the biggest problem is how to face the future network-based system toward a smooth transition, which is currently the number of mold number of hybrid system in one of the main, but overall, the simulation in the practical application of monitoring technology is more mature, and thus will maintain the proper place.

FPD Taiwan 2011 Display Taiwan on June 14 to June 16 to start the show a lack of AU Optronics, Chi Mei two heavyweights, so the show eclipsed only CPT, Chi Lin, Yuan and other manufacturers too to support the overall, manufacturers continued to sizzling touch panel 2011, as related components such as Corning, 3M, etc., equipment manufacturers such as CSUN, Shibaura advanced so join the festivities. Small size and the show emphasizes the development of new technologies such as touch, 3D, flexible displays, etc. The exhibition 231 exhibitors, 630 booths to use the history of the largest three-day exhibition attracted 45,000 visitors, up 14% over last year. Seminar is divided into market trends, flexible displays, AMOLED, electronic paper, 3D technology, touch, equipment and materials and other topics published. Ovid Consulting (AVC) at the symposium published in the Chinese market views.

CPT show HFFS, OLED lighting, WindowLCD techniques emphasize technical capabilities of small and medium size

Taiwan, one of the major panel makers CPT, in the show to small and medium-size products, mainly in the 15-inch display the following exhibits, mostly around touch technology, 3D, e-paper appeal to a more specific part of the Since in HFFS technology, mainly from the CPT technology Hydis technology, and make improvements in this technology, developed HFFS panel, the size of the main applications for the product, but also for the current CPT Hydis OEM panel.

Another more specific products for OLED lighting and WindowLCD products. CPT has been in the development of OLED products on display to the lighting for the demands of light-emitting area of ​​80mm * 80mm products, mainly OLED lighting and LED lighting is different, because the plane light-emitting OLED, LED as light source, So in some niche markets OLED is still demand. Why is there no mass production CPT OLED, due to the high cost of OLED and temporarily unable to replace the LCD market, so there is no CPT production. Another product WindowLCD, this product last year, Samsung, LGD FPD Exhibition in Japan has been demonstrated that CPT is also with the same technical capabilities.

PVI color e-paper display

PVI is committed to the development of electronic paper, although the threat of e-paper by the LCD, but in the U.S. and European markets still have a certain market share. Color e-paper technology sophisticated year after year, PVI current technology already in volume production, but the paper in portable electronic products is more difficult to compete with LCD, LCD in picture quality performance than the electronic paper is good, but life , the electronic paper is better than LCD, so the future of electronic paper go a niche market, such as the billboard market, publishing markets, because most books more comfortable with the reflected light, billboards do not need to change the screen so long, so These are the niche market of electronic paper.

China Welding

3D display technology and the continued pursuit of progress touch interfaces

3D display technology continues to introduce new CPT technologies developed in the handheld product and cross straight to see it all the technology can render 3D images through a four-color RGBW pixel array and liquid crystal display control, to directly see the horizontal view can display 3D. Of course, bear with other technologies such as Shutter-glass, PatternRetarder of glasses of 3D, LenticularLens other naked eye 3D technologies that are already quite mature. 3D penetration is still low at present, but cheap in price and content-rich after the gradual, 3D penetration will rapidly increase. Taiwan touch panel technology for the world’s leading supplier companies, one in the optical show, the touch panel display mostly in plant size touch panel-based, mainly from the flat plane of the boom, driven by touch panel size zoom, size, mostly in the 4-inch to 10 inches between the companies technology is more refined in capacitor technology.

Seminar will stress the development of future technology and market prospects

Display Taiwan exhibition, the size of the considerable number of seminars, the main conference is divided into market trends, flexible displays, AMOLED, electronic paper, 3D technology, touch, equipment and materials issues, can be said that the display of the issues are financial into being at the seminar, the focus of the market the most two, respectively, AMOLED panel market trends and technological development progress.
Samsung AMOLED panel from the beginning to the application on the phone, the market for the development of AMOLED attention gradually deepened, although not in this exhibition have AMOLED products, technology developers for its market is still as concerned about the seminar focused on AMOLED backplane technology development, mainly in order to display the next generation – flexible displays to prepare for the AMOLED market, there are lecturers that the AMOLED market in 2011 could reach 75 million about the level of turnover could reach U.S. $ 1.5 billion expected in the next few years have a high level of growth.

Progress of development in the company, still the most rapid development of SMD, the current 5.5-generation line has been established to complete the second phase, expected to begin volume production in early 2012, the maximum monthly capacity of 75,000, SMD 8.5-generation line is also actively planning to meet AMOLED applications to the TV using the product. As for the other panel makers are also active in research and development which, such as AU Optronics, Chi Mei, LGD, but costs are still important issues.

Another focus of the market is still in Chinese market, because Europe and other advanced countries by the financial turmoil, for the purchase of television strength is limited, but European and American markets in the LCDTV replace CRTTV rate of almost 100%, so difficult to stimulate the market strength, so all men will focus on emerging markets in the LCDTV sales growth conditions, while China has the biggest upgrade for the LCDTV market.

Electric golf cars

Ovid Consulting (AVC) published in the seminar on the Chinese market’s view, for the Chinese market is still optimistic, though in the first quarter volume growth rate of about 5%, the demand is still for the second half, so the whole LCDTV annual demand will reach 38 million units are still expected, mainly the sale of eleven is still an important holiday, and expect the Chinese government’s subsidy policy will be implemented under the new generation, still stimulate market demand.

Ovid Consulting (AVC) There is also China’s color TV industry in the panel to analyze procurement and supply chain, can be found if the TV industry co-operation with the LCM panel, in the procurement strategy will tend to co-panel plant, such as TCL, Changhong, Haier is cooperation with the Friends have built up LCM plant, so in the procurement of AUO’s panel will be relatively high, and Skyworth is cooperation with the LGD, so in the LGD of the relatively high proportion of procurement.

Taiwan monitor makers show a lack of support but still exciting post in the forum

Despite the lack of development of Taiwan’s display AUO, Chi Mei manufacturers participating, but there is still support for the international equipment and materials manufacturers, to remain the show worth seeing, although not the Friends of the exhibition, published in OLED technology development seminar, said Friends of the up in OLED development will not be absent, and R & D efforts in next-generation display. 3-day exhibition, the Forum exhibition are displays showing the development trend of the future, in terms of flexible display, touch, 3D is focused on the future development of the display remain confident.

Recently, Yang Opto Taiwan Green $ 100 million investment in high-power LED packaging project was officially settled in Nanchang Hi-tech Zone. Thus, in addition to advanced electric, Taiwan LED packaging giant, eight have been set up factories in the Mainland. The industry believes that with the strength of Taiwan-funded enterprises in the Mainland to actively layout, had been in the low-end, serious and homogenization of production in the price war’s LED packaging companies will usher in greater challenges, the industry can be expected shuffle the coming era.

Taiwan-funded enterprises large market share

2010, China’s total output value of the LED package 27 billion, an increase of 35% is expected this year will be the continuation of 20% to 30% growth rate. Although the rapid development of LED packaging market, but market share was foreign and Taiwan enterprises and other giants of the control.

It is understood that currently there are 1,500 packaging company with annual sales of 1 billion yuan in the first camp there are more than 40 sales at between 10 million to 100 million yuan less than the second camp, 400 enterprises, accounting for about 30% less than the majority of the company’s sales to 10 million yuan. This eight packages of Taiwan listed companies is far from an average of 10 billion in sales.

Taiwan’s domestic enterprises to actively layout, technology and talent to seize the domestic high-end packaging market, while domestic packaging manufacturers are mostly concentrated in the low-power low-end products, serious homogeneity. Currently a large number of LED packaging companies respond to market competition is one of the principal means of low-cost, small businesses or even at the expense of product quality.

In this regard, Huazhong University of Science and Technology Research Center Microsystems Sheng believes that the current packages in terms of reliability behind foreign countries, there were only a few can meet the reliability test step 18 foreign countries. China’s LED packaging and testing if any, standards are well below their foreign counterparts.

China Welding

More intense price war to fight

Engineering LED industry researcher Zhang standard introduced in 2010, domestic prices fell in the LED packages 10% to 15% range, but the first half of this year, prices have accelerated the trend, especially in low-power package industry, competition is particularly fierce, a decline of maximum. As the low-power package product competition is particularly fierce, and some manufacturers have started using informal or non-conforming products packaged chips, it very much a drag on the company’s regular large-scale chip package price.

“Now most companies are cutting corners, not entirely corporate behavior, but the market pressure.” Optoelectronics Technology Co., Ltd. Dalian nine years, General Manager Shi Weili said publicly that packaging companies in the gross margin decline, the market pressure is increasing.

Country star power [24.545.19% shares it] (002 449) in the first quarter report, LED packaging products, consolidated gross profit margin fell 9.52%, to 22.97%. Changes in the interpretation of results when the report, said prospects for promising TOPLED, in order to expand market share, take the initiative to lower the prices, causing gross profit margin. Managing Director of country star power Sen has said that a large range of business expansion, competitive packaging industry, in response to competition, need such adjustments.

Lehman photoelectric [24.042.52% shares it] (300 162) also showed a quarterly, its net profit fell as much as 38.23%. One of the report explain why the LED market is highly competitive, prices continued to decline.

Electric golf cars

Industry consolidation imminent

LED industry chain from upstream LED epitaxial silicon, midstream and downstream LED Lighting LED packaging application of three major parts. Profits from the chain of distribution, the upper extension of chips on a 60% to 70% of the profits, while the LED packaging and LED lighting applications, respectively, share only 10% to 20% of the profits.
Technically, the production of the upstream chip most difficult barriers to entry are at least 100 million yuan to 2 yuan, and the chip product development cycles, large uncertainties, currently there are very few companies chip R & D capability and R & D mostly stays in the laboratory stage, but the middle LED packaging industry capital threshold is only tens of millions, so many companies choose to enter the LED industry, rather than the upstream chip package, so competition is fierce in this field.

LED packaging, and Taiwan-funded enterprises by foreign value, but also because it is connected to the upstream and downstream LED technology application development market demand, route, linking the important part. China Optics and Optoelectronics Manufactures Association, Branch Secretary-General Peng Wanhua LED devices that middle extension package is the upstream process, the chip market to protect, to promote the extension of the former process, the chip industry, only the package this up, can really do the LED industry, big strong.

LED packaging industry for the domestic status of small and scattered, director of investment consultancy, said Zhang Yan Lin, a leading LED packaging company in order to achieve efficient development, we must use the power of capital markets mergers and acquisitions, horizontal and down vertical integration. Institute senior engineer Zhang Xiaofei LED industry has also publicly said, LED industry if the reshuffle, packaging companies should bear the brunt.

June 12, 2011, on an unprecedented scale, colorful Guangzhou International Lighting Exhibition pull up her huge curtain, ended the lighting industry event. In fact, the ‘participants and industry to segment, as it is an LED carnival, occupying 60% of LED lighting equipment and technology, the industry clearly see the LED industry, prosperous and prospects.

At present the development of LED in China, can be described in full swing. Many people think that the LED is only in recent years, emerging technologies and new products. In actual fact, early in the 1970s when the country has been doing the LED-related industries, but the LED technology has just started, Fengyun stars of the future, not Visible.

The LED industry, in the eighties, more than 100 companies nationwide, 95 percent of manufacturers are engaged in production, packaging, the required die almost all imported from abroad. There are several “Five-Year Plan” of technological innovation, technology research, the introduction of foreign advanced equipment and key technologies, so that the production of LED technology has been a step in stride. In 1990 the formation of the growth period. On the one hand, limited by the LED material, LED display is a wide range of applications has not been expanded, on the other hand, the display control technology is basically a communication control method, display of the target. Meanwhile, LED display has been widely used in foreign and domestic small products to the red, green and white dominated, control communication control, four gray relatively high product cost single-point grayscale adjustment method.

China Welding

1990-1995, this stage is the period of rapid development of LED display. Into the nineties, the global information industry growth to continue in all areas of information technology breakthroughs, LED display in LED materials and control technology has also been new results appear. Successful development of blue LED chip, full-color LED display market; computer and microelectronics technology, video control technology, 16-level grayscale display and 64-gray, gray tone display control technology field, the screen dynamic display greatly increased. This stage, LED display from the initial annual output value of tens of millions to dozens of companies developing very fast, China’s development, some companies, the annual output value of several hundred million dollars, product applications, including financial, securities, annual output value, Sports, airports, railway stations, road traffic, advertising, postal, telecommunications and many other fields, especially in 1993, more equity securities industry, LED display market to grow substantially. The field of LED display panel shows the basic formation of mainstream products, LED high-tech industry into a new display industry.

Electric golf cars

LED display of the data showed that: Since 1995, LED display developed into a steady improvement of the overall industrial structure adjustment and improvement of the period. At the same time, LED display with the competition, many small and medium businesses, products, prices, a wider range of applications, the product quality, standardization and other aspects of the formation of a series of new problems, on the LED display relevant departments attach great importance to the development of and make the appropriate standards and guidance, the current work in this area is gradually deepened. China LED display industry into the fast-growing channel, with a certain scale backbone enterprise groups have begun to emerge, to be considered only the basic form of China’s LED display industry.

Overall, the domestic LED industry is still in the growth stage, the market has not really mature. The status quo, all indicate that the LED in China, will have a very great potential, with the world’s largest market space, hoping domestic LED pioneer who can grasp the core technology is taking the better and more stable.

Central Station is located within the new Wuxi Wuxi Bus Station will be put into operation 26, June 23, before the opening of the Japanese newspaper reporter had visited the station, the reporter found that the stations are all highlights of human culture, human and intelligent design. Wuxi Bus Station tickets today from time to adjust for the pre-sale tickets within 2 days. Today, passengers have to buy 26 tickets the day of Passenger Station. Particular need to be reminded that the new station is still in the run-in period of operation, passengers will travel in the North Plaza. Car passengers should pay particular attention now face travel sites.
Shape like one are blue lake

Reporters learned that the new Wuxi Bus Station is the hub of the city’s new road passenger transport is the largest urban area in Wuxi, the only bus terminal. Wuxi North Square area as a landmark – the original new Wuxi Wuxi Bus Station Bus Terminal, the former high-pier bridge Bus Station, West Bus Station and other former Wuxi formed from three stations.

June 23, reporters came to visit Wuxi Central Station, it was introduced, the appearance of the new terminal design using red and yellow lines, the use of ceramic body material, both to achieve a practical effect and the visual appearance of harmony, but also reflects the green design. From standing height overlooking the panoramic view of the station, both as one are blue lake, and as a flying pigeon wings. In fact, the entire station design contains a profound meaning. Wuxi Taihu passenger who embodies inclusiveness, dedication, and also to represent them in the new station will continue to serve visitors from all over the world. Pigeon metaphor for the station’s future ambitious, harmonious, Wuxi passenger who is not afraid of storms, the work of courage portrayal.

China Welding

A “next entry on the” form

Currently the station has entered the mop-up stage, workers everywhere are busy busy. The station construction area of ​​124,000 square meters, designed with “the next entry on the” form of the traffic, the orderly flow separation. This marks the city’s traditional passenger vehicles from Mixed mode to pedestrian and vehicular traffic patterns change. The understanding of the design side of developed countries to learn the advanced experience of the city’s transportation hub, and completely abandon the traditional square Mixed Exalted car idea, all on the ground road vehicle traffic, pedestrians and passengers to use the basement and ground floor dedicated channel access, bus station and the Shanghai-Nanjing Intercity Railway Station Hall starting platform using ground floor, basement to reach the way, thus avoiding the intersection with the road depot, passenger traffic increased road traffic safety and efficiency. 360 parking spaces inside the station to reach the position 16, the grid 54 to ensure the 50 bus at the same time grid.

Overall construction sub-basement, ground and three. Reach the basement of the station hall, the ground segment from the bottom, respectively, the station hall and departure hall. Enter the departure hall, I saw workers are debugging 120 square meters, full-color LED display, when the passengers in the square that is released shuttle information, service information at a glance. Display on the back wings flying Dove relief reflects the Wuxi passenger people, “sincerity, goodness, and beauty” realm, but also to society, “fast, safe, comfortable” service commitment.

The all-transparent glass lobby designed to take full account of indoor lighting and energy saving needs. A flyover in front of departure hall with seamless high-speed rail, passengers can easily achieve zero transfer. A variety of intelligent devices into use a total of two layers of the departure hall. Among them, two-story set ticket office, waiting room, office, commercial, etc. The use of L ticket office Shoupiao Chuang design, set up 35 ticket windows, 17 of them indoors, 18 outdoors. Staff are on the same day ticketing system for debugging. Ticket office is designed to fully take into account the acoustic effect to reduce the noisy sound. Self-service ticket machines inside the hall is the Bus Terminal, the first fully functional self-service ticket machines, support for CUP cards, card, cash in three ways. Manual windows and the interconnection of ticket vending machines, passenger tickets mode can be selected. Total service station in Lake sail for the background design, contains a wonderful blessing blessing passenger smooth.

Electric golf cars

Self-storage cabinet system uses the host computer to control access and touch-operation face recognition.

This is not only safe, reliable, and the use of sensing technology to bring travelers a more convenient service. Waiting room also has a supermarket happy, happy book club, take all the company’s operations. Area in front of the ticket using L-shaped design, 2A District area for the self-service check-in, 13 check-in gates, the main ship Shanghai-Nanjing train. 2B District 14 ticket gate, the main shipping around the short bus. Past the city’s passenger check-in manual mode are used, the automatic ticket the first time in the city. In another, put into use in the automated machine will be added, when the frequency of visitors very well. Convenient transit transfer passengers booking the elevator up the third floor waiting room after. The waiting room area of ​​3200 square meters, located next to the elevator passenger self-service area; old and sick waiting room waiting room set up the right side of the same, maternal and child waiting room, toilets and drinking water office. And then further away is the three-wicket area, Northern side of the main shipping lines and ultra-long class contract bus lines. Outbound traffic from the second floor exit through a dedicated connection through the River Road, directly overhead at high speed, so that not only reduce the pressure on urban traffic, but also easy to train out of town.
Afterward, the reporter went to the basement hall, where the set-off area under the long-distance bus, parcel arrived libraries, ticketing area, taxi parking area, employee parking area and an important room. Ticketing area is located 10 Shoupiao Chuang and four vending machines, transit transfer for passengers booking. LED display above the main entrance hall to reach the vehicle arrival time of release. Can be achieved through the arrival hall Descented railway, subway, bus and other seamless transfer. Take the elevator to the ground floor of the station hall. Outbound hall area of ​​about 2,000 square meters to public transport, tourism, distribution-based, there are currently more than 10 lines; the hall surrounded by KFC, McDonald’s, Tiffany’s and other chain stores.

Decade, plagued China’s color TV enterprises in the global LCD market competition in the “chain is incomplete, lacking the core components of” other issues, will be a strong rise of the global market are China’s domestic consumer electronics giant TCL break.

Recently, the reporter learned from the TCL, TCL8.5 generation LCD panel production line up to overcome the impact of the earthquake in Japan, is expected to be put into operation in August this year the successful ignition of the project in addition to Samsung reached ODM (brand OEM) strategic cooperation, a few days ago entered into a strategic partnership with LG Chem, common in the flat panel display with a polarizer, photoresists and other materials to start business co-operation, 3D LCD TV in advance to seize market opportunities. Meanwhile, following the industrial park in Xinjiang after the LCD, TCL has gain another victory, investment and construction in Inner Mongolia, the whole LCD module integration projects.

Open up the LCD industry chain

In recent years, TCL Multimedia LCD industry has been based on the global, open and positive attitude carried out on the chain, the middle and lower reaches of the full layout.

China Welding

Upon completion of the 8.5-generation LCD panel production line, after the investment, TCL in the industry chain has not slowed the pace of expansion. Recently, TCL to join Samsung in Suzhou Samsung 7.5-generation LCD panel production line construction, through self-investment, joint ventures and other means to participate in a short period of time for small and medium-size to large-size LCD panel production line resource control.
As the world’s sole control of both the polarized type, shutter, naked-eye 3D technology, business, TCL in the downstream industry chain fully with the “triple play” policy opportunities, opening the domestic super-smart new development of the first year of Internet TV, combines LED, intelligent, 3D and many other industry trends, to achieve an accurate grasp of consumer demand.

Market into the harvest period

After 10 years of continuous investment, the accumulation of more than five years of sprint, the reporters saw this year, TCL’s LCD TV market in the world getting into the harvest period.

Electric golf cars

May this year alone, TCL LCD TV up 39.42%, sales of 558,200 units, which in the domestic market, LED backlight LCD TV market share reached 36.30%, the proportion of smart Internet TV sales reached 27.47%. This means that, with the TCL LCD TV for the whole industry chain of continuous efforts into the enterprise on behalf of the future trends of the LED, the Internet intelligence in the proportion of high-end products significantly improve, to achieve the enterprise’s product structure upgrades.

Not only in China, since 2010, TCL has been rapid growth in sales in overseas markets. In the European market to focus on strategies for key customers to promote its own brand TCL TV, and trends in the market introduction of LED-backlit LCD TV, making France, Spain, Switzerland, presents market share growth.

Recently, TCL will be only in Italy and multimedia, telecommunications, home appliances field of nine three customers signed nearly 300 million euros in economic and trade cooperation projects, marking the TCL rapid recovery in overseas markets and a rebound.

June 22, 2011, the third Shanghai International digital signage and touch-inquiry and Technology (hereinafter referred to as “Digital Signage Show”) at the Shanghai International Exhibition Center held as scheduled. As the leading information display industry event, which covers the industry’s most comprehensive and professional work shows, dozens of new product launches and technology seminar, which attracted more than 170 companies active participation and many of the media, industry, users are attracted to . The LGB2B as a leader in the field of commercial display in the exhibition goes to a total digital signage, 47-inch display and ultra-narrow stitching “easy as”, “Express” business solutions to complete product coverage highlights its business solutions in the extraordinary strength.

Big-screen lead the new trend in the industry

Today, as people increasingly frequent social activities in public places on the big screen is beginning to show strong demand for information display, all kinds of mosaic screen devices become the new darling of the market. LGB2B booth at the scene, ultra-narrow 47-inch display is extraordinarily eye-catching stitching, this LGB2B most representative of the narrow border stitching display 47WV30, with only 6.3mm ultra-narrow frame, can achieve the perfect seamless, almost without leaving any traces; IPS hard-screen application, so response time is faster, larger viewing angle, the picture is more “simply”; and energy saving LED backlight, so that product performance and then upgrade. Large screen display in the information context, LG47WV30 as the audience well-deserved star, LG will launch a series of mosaic screen monitor industry trends will also be no doubt.

China Welding

Providing innovative solutions in digital signage

“In China, vigorously promote the commercial digital signage display market,” is the most critical in 2011 LGB2B strategic plan. The Digital Signage Show, LGB2B even the main push of the “Express” digital signage solutions and “easy as” TV Digital Signage Solutions at the public. For the transport industry, “Express” intelligent information distribution system, with “Software Software + (and beyond) home PC + monitor” the groundbreaking combination of people from the airport lounges, train stations or other public space through the “Express” to obtain real-time traffic information services, with a high degree of intuitive and user-friendly features are gradually moving towards the mainstream of traffic display solutions.

Then this basis, LGB2B continue to broaden the application areas, taking into account the introduction of a television feature “easy as” TV digital signage solutions, which include a “pleasure to enjoy” and “Express” all the advantages, to serve the profession , small and medium enterprises, directly for the general public, broader range of applications, the operation easier for the more commercial field users with a “personality” of the business information solutions. It is worth mentioning that long ago, LG “Easy as” also won the magazine issued by the U.S. CommercialIntegrator the best product award, won the global media industry is certainly sound.

Electric golf cars

Do not cover multi-sector solutions to provide industry

“For the various industries to provide a full range of commercial solutions,” is LGB2B the future direction of development. To achieve this goal, LGB2B deployed for hotels, transportation, government, education, business and other fields of personalization, the advantage of the solution, and the show to be fully present. Among these, including both LCD and PDP TV products of the hotel, and “pleasure enjoy the” hotel system solutions for the hotel industry, providing a more comfortable, intelligent information technology environment; also specializes in the education market, “Hui Union” display Group solution for more students to bring a separate window of the multimedia teaching experience; for large public sector, LGB2B also brought a touch screen, advertising machines, multifunction machines and other cutting-edge technology products for our government, and financial key areas of information display to make a contribution.

All along, LGB2B keep all of China’s information technology industry, devoted their efforts to find all kinds of commercial display products and solutions to meet the needs of different users of the application, with its extensive coverage, breaking and leading professional looking to become leader in the field of commercial display. Through the Digital Signage Show, LGB2B industry will be more familiar to users, and its absolute leader on industry trends, the exhibition is more important.

Full access to traditional lighting LED is constantly accelerating. According to Japanese media reports, the fourth week of May 2011 sales of LED lighting products accounted for 42.3% of total sales, this is the first time in more than incandescent LED sales. With the follow-up of emerging markets, the replacement of white LED components and related industrial chain updates, will enter the global LED industry, the real “golden age.”

White LED to replace the general trend

Has great potential as a light source, LED’s long life, rugged construction, low power consumption and flexible dimensions, etc. by the people more and more attention. In people’s daily life, white is the most common and the most common source. Therefore, the white LED market is expected to compete to become the largest manufacturer of a cake and highly favored.

China Welding

Compared with five years ago, LED white light is more and more into lighting applications. Semiconductor devices and related core technologies to support rapid development, driven by a white LED chip in on the rapid increase in the indicators, white LED light effect, color, color temperature and the power a single LED module and LED indicators of flux and other parameters continue to achieve new breakthroughs, white LED light source device directly to the prospect of replacing traditional industrial researchers in the field of vision is also increasingly clear.

Technological progress is the fundamental driving force of the future. Seminar, Philips LED lighting system and control the world, senior director of GeertV.d.Meer said: “By 2015, LED will reach 150 lumens / watt efficiency, will be more than the gas discharge lamp, and we should make more and more people feel the LED lighting, white LED with high-tech products represented a direct replacement for traditional light sources will become a trend. ”

However, the light principle, circuit control section with conventional light sources – LED system for itself compared to incandescent and energy-saving lamp system complexity, the popularity of white LED is facing unprecedented difficulties. Behind the direct replacement, a “simplifying” it often means that developers in systems integration and unique aspects of more effort.

Electric golf cars

Sublimation chain specialized modules

The future development of the LED market may be able to use today’s computer hardware industry do learn. Ten years ago, from the motherboard, memory, and then to the whole, many companies have chosen to produce the required components as independent; and today, the result is specialized segments of the greatly reduced number of vendors in exchange for is the overall size of the market and technology development phase of the leap. Perhaps, LED industry will be true tomorrow.

After more than ten years of development, large-screen display system has been widely used in various fields, but because of large-screen products have a certain degree of technical difficulty and high technology content, so far, there are still a large part of the user For large-screen display little knowledge about the product, so the projector era network users should be asked today to look at the popularity of the three large-screen display market mainstream technical knowledge, because only by understanding this can we better understand the product.
From a technical type of points, then, large-screen products can be divided into the mouth, DLP rear projection splicing unit, LCD and PDP unit LCD, plasma splicing splicing unit three categories. With their advantages, these three technologies currently in the market competition is very close but in the end these three techniques one is better, I believe after reading the following description, your mind will naturally clear.

Welds, “and no one can” DLP rear projection splicing

DLP full-called “DigitalLightProcession”, in Chinese means digital light processing, which means that this technique should first signal through the digital image processing, and then the light is projected. That specific point is, DLP projection technology for digital micro-mirror chip (DMD) as the key treatment components in order to achieve digital optical processing.

The principle is emitted through the UHP lamp cold light source through the condensing lens, the light uniformity by Rod, after treatment, the light will light through a color wheel into RGB color, then color the lens projected on the DMD chip, Finally, after reflecting on the projection screen projection lens imaging.

DLP rear projection display wall display unit by a number of mosaic, its main feature is a small patchwork, patchwork its minimum can be reached zero millimeters, can be truly “seamless” stitching, which is LCD and PDP technology, the other two can not match and the.

China Welding

DLP mosaic of course has its drawbacks. As the DLP light source is spliced ​​from light bulbs, led to its power consumption, heat dissipation is high, and the use of brightness over time will be reduced, causing the user must constantly changing light bulbs to keep the initial display, and its unit larger box, the installation will cause some trouble, and so on, to the user’s inconvenience.

But with the continuous development of splicing techniques, has now solved the frequent splicing DLP lamp replacement, power consumption, heat dissipation higher range of issues, which have benefited from the LED light source added. After using the LED light source DLP stitching unit, not only in life get a major breakthrough, while the color to power and other aspects of revolutionary change, so continue to maintain market-leading DLP mosaic advantage.

Stitching unit ultra-thin, ultra-light LCD Video LCD

LCD’s English full LiquidCrystalDisplay, LCD is the construction of two parallel glass in place among the liquid crystal, two glass middle of a small number of vertical and horizontal wires, through the power to control or change the direction of rod-shaped crystal molecules, reflecting the light generated images.

LCD consists of two glass composition, thickness of 1mm, during which the liquid crystal material containing 5? ? m spacing evenly separated. Because the liquid crystal material itself is not light, so both sides of the screen with a light source lamp, and in the back of a backlit LCD display board (or even light board) and the reflective film, backlight is a fluorescent material consisting of can emit light, and its main function is to provide a uniform background light.

Backlight light from passing through the first polarizing filter layer after layer into the liquid crystal droplets of liquid crystal containing thousands of layers.

Droplets of liquid crystal layer are included in the small cell structure, one or more cells form one pixel on the screen. Between the glass and the liquid crystal material is transparent electrodes is divided into rows and columns, row and column intersection, by changing the voltage changes the optical state of liquid crystal, liquid crystal material acts like a small light valve .
In the liquid crystal material surrounding the control circuit and driver circuit portion. When the LCD field generated in the electrodes, the liquid crystal molecules will produce distortion, which will be there through one of the rules of the refraction of light, and then through the second filter layer of the filter layer on the screen display.

LCD is only in recent years developed a splicing technology, its greatest advantage is its low power consumption, light weight, long life, no radiation, the screen brightness and uniform, but the LCD is the biggest disadvantage of a larger patchwork . And DLP only 0.3 millimeters patchwork can not compete. Requirements for very fine display users, a little bit of regret, which is currently only occupy the low-end LCD market stitching a key factor.

Electric golf cars

In order to reduce the patchwork, patchwork reduce the interval to bring the user a sense of LCD makers have been stitching since also been efforts. Among the many manufacturers, Samsung is undoubtedly the most commendable. In recent years, Samsung has introduced a more narrow LCD patchwork stitching unit, from the initial 7.3mm, the 6.7mm, and then in 2011 launched a new unit of splicing 5.5 mm LCD, Samsung lead the way, and continue in the patchwork gained a breakthrough, set off a wave of liquid crystal mosaic again and again.

The most obvious technological advantages PDP plasma splicing

PDP is, PlasmaDisplayPanel abbreviation, the Chinese name for the plasma display panel. PDP is a display technology using gas discharge, and it works very similar to fluorescent lamps. It uses a plasma tube as a light-emitting element, a plasma screen on each tube corresponds to a pixel, screen glass as a substrate, the substrate a certain distance away, surrounded by a gas-tight seal to form a discharge space. Discharge space filled with neon, xenon and other inert gas mixture as a working medium.

In the inside surface of two glass substrates coated with conductive metal oxide film electrodes for excitation. When adding voltage to the electrodes, the discharge space of the mixed gas plasma discharge phenomenon will occur. Gas discharge plasma generated UV, ultraviolet excitation screen, screen emits visible light, showing the image.

When using a screen coated with RGB phosphors, the UV excitation screen, then screen the light was red, green, and blue. When each color unit with 256 levels of gray and then to color mixing, we achieve color display.

From a technical principle, due to the PDP plasma screen in the light tube evenly distributed in the plane, so that the image center and the edge of the display exactly the same, without distortion, achieving a true sense of the pure plane. In addition, as shown during the electron beam movement is not without the help of electromagnetic fields, so the external electromagnetic field does not interfere with them, with good environmental adaptability.

Compared to LCD technology in terms of, PDP splicing not only did it, the bigger the screen the image depth of field and higher fidelity, but it also avoids the LCD technology in the face of response time problems, and the PDP than the patchwork LCD Mosaic smaller, although they can not achieve zero millimeters of DLP mosaic patchwork, but the visual effect of excluding almost be omitted, and the PDP screen is very thin body. Simply put, that is, PDP-splicing techniques, combined with the LCD and DLP all the benefits of two technologies, while overcoming their shortcomings.

Especially in recent years, plasma technology to overcome their fatal flaws, “screen burn” phenomenon after a growing number of manufacturers began to market into the plasma, completely out of the past few years, only Oriole Security vendor “alone” status, and showing the “Flowers” scene.

The current market consumer appliances, a new trend: more and more consumers willing to spend more money, but also choose more energy saving, more functional, more stylish appliances.

Liu Wei, deputy After more than ten years of development, large-screen display system has been widely used in various fields, but because of large-screen products have a certain degree of technical difficulty and high technology content, so far, there are still a large part of the user For large-screen display little knowledge about the product, so the projector era network users should be asked today to look at the popularity of the three large-screen display market mainstream technical knowledge, because only by understanding this can we better understand the product.
From a technical type of points, then, large-screen products can be divided into the mouth, DLP rear projection splicing unit, LCD and PDP unit LCD, plasma splicing splicing unit three categories. With their advantages, these three technologies currently in the market competition is very close but in the end these three techniques one is better, I believe after reading the following description, your mind will naturally clear.

Welds, “and no one can” DLP rear projection splicing

DLP full-called “DigitalLightProcession”, in Chinese means digital light processing, which means that this technique should first signal through the digital image processing, and then the light is projected. That specific point is, DLP projection technology for digital micro-mirror chip (DMD) as the key treatment components in order to achieve digital optical processing.

The principle is emitted through the UHP lamp cold light source through the condensing lens, the light uniformity by Rod, after treatment, the light will light through a color wheel into RGB color, then color the lens projected on the DMD chip, Finally, after reflecting on the projection screen projection lens imaging.

DLP rear projection display wall display unit by a number of mosaic, its main feature is a small patchwork, patchwork its minimum can be reached zero millimeters, can be truly “seamless” stitching, which is LCD and PDP technology, the other two can not match and the.

DLP mosaic of course has its drawbacks. As the DLP light source is spliced ​​from light bulbs, led to its power consumption, heat dissipation is high, and the use of brightness over time will be reduced, causing the user must constantly changing light bulbs to keep the initial display, and its unit larger box, the installation will cause some trouble, and so on, to the user’s inconvenience.

But with the continuous development of splicing techniques, has now solved the frequent splicing DLP lamp replacement, power consumption, heat dissipation higher range of issues, which have benefited from the LED light source added. After using the LED light source DLP stitching unit, not only in life get a major breakthrough, while the color to power and other aspects of revolutionary change, so continue to maintain market-leading DLP mosaic advantage.

Stitching unit ultra-thin, ultra-light LCD Video LCD

LCD’s English full LiquidCrystalDisplay, LCD is the construction of two parallel glass in place among the liquid crystal, two glass middle of a small number of vertical and horizontal wires, through the power to control or change the direction of rod-shaped crystal molecules, reflecting the light generated images.

LCD consists of two glass composition, thickness of 1mm, during which the liquid crystal material containing 5? ? m spacing evenly separated. Because the liquid crystal material itself is not light, so both sides of the screen with a light source lamp, and in the back of a backlit LCD display board (or even light board) and the reflective film, backlight is a fluorescent material consisting of can emit light, and its main function is to provide a uniform background light.

Backlight light from passing through the first polarizing filter layer after layer into the liquid crystal droplets of liquid crystal containing thousands of layers.

Droplets of liquid crystal layer are included in the small cell structure, one or more cells form one pixel on the screen. Between the glass and the liquid crystal material is transparent electrodes is divided into rows and columns, row and column intersection, by changing the voltage changes the optical state of liquid crystal, liquid crystal material acts like a small light valve .
In the liquid crystal material surrounding the control circuit and driver circuit portion. When the LCD field generated in the electrodes, the liquid crystal molecules will produce distortion, which will be there through one of the rules of the refraction of light, and then through the second filter layer of the filter layer on the screen display.

China Welding

LCD is only in recent years developed a splicing technology, its greatest advantage is its low power consumption, light weight, long life, no radiation, the screen brightness and uniform, but the LCD is the biggest disadvantage of a larger patchwork . And DLP only 0.3 millimeters patchwork can not compete. Requirements for very fine display users, a little bit of regret, which is currently only occupy the low-end LCD market stitching a key factor.

In order to reduce the patchwork, patchwork reduce the interval to bring the user a sense of LCD makers have been stitching since also been efforts. Among the many manufacturers, Samsung is undoubtedly the most commendable. In recent years, Samsung has introduced a more narrow LCD patchwork stitching unit, from the initial 7.3mm, the 6.7mm, and then in 2011 launched a new unit of splicing 5.5 mm LCD, Samsung lead the way, and continue in the patchwork gained a breakthrough, set off a wave of liquid crystal mosaic again and again.

The most obvious technological advantages PDP plasma splicing

PDP is, PlasmaDisplayPanel abbreviation, the Chinese name for the plasma display panel. PDP is a display technology using gas discharge, and it works very similar to fluorescent lamps. It uses a plasma tube as a light-emitting element, a plasma screen on each tube corresponds to a pixel, screen glass as a substrate, the substrate a certain distance away, surrounded by a gas-tight seal to form a discharge space. Discharge space filled with neon, xenon and other inert gas mixture as a working medium.

In the inside surface of two glass substrates coated with conductive metal oxide film electrodes for excitation. When adding voltage to the electrodes, the discharge space of the mixed gas plasma discharge phenomenon will occur. Gas discharge plasma generated UV, ultraviolet excitation screen, screen emits visible light, showing the image.

When using a screen coated with RGB phosphors, the UV excitation screen, then screen the light was red, green, and blue. When each color unit with 256 levels of gray and then to color mixing, we achieve color display.

From a technical principle, due to the PDP plasma screen in the light tube evenly distributed in the plane, so that the image center and the edge of the display exactly the same, without distortion, achieving a true sense of the pure plane. In addition, as shown during the electron beam movement is not without the help of electromagnetic fields, so the external electromagnetic field does not interfere with them, with good environmental adaptability.

Compared to LCD technology in terms of, PDP splicing not only did it, the bigger the screen the image depth of field and higher fidelity, but it also avoids the LCD technology in the face of response time problems, and the PDP than the patchwork LCD Mosaic smaller, although they can not achieve zero millimeters of DLP mosaic patchwork, but the visual effect of excluding almost be omitted, and the PDP screen is very thin body. Simply put, that is, PDP-splicing techniques, combined with the LCD and DLP all the benefits of two technologies, while overcoming their shortcomings.

Especially in recent years, plasma technology to overcome their fatal flaws, “screen burn” phenomenon after a growing number of manufacturers began to market into the plasma, completely out of the past few years, only Oriole Security vendor “alone” status, and showing the “Flowers” scene. general manager of Tong Cheng Electric yesterday (June 21) told this reporter, the first half of this year, LED TV, Washing Machine, inverter air conditioner, three, and on the refrigerator door, SLR camera, 3G mobile phones and other high-end product sales greatly improved over last year, energy-efficient refrigerators, washing machines and low-carbon environment intelligent home appliances by the blitz.

Traditional four piece line upgrade

Color TV, air conditioning, refrigerators, washing machines, are inseparable from every household before the traditional four pieces, it is already happening too much change.

TV: Currently the most popular TV family now has been largely replacement. Liu said that by year end, LCD will be out of the mainstream market, LED TV is leading the trend. Compared with LCD TV, LED brightness, power consumption, viewing angle and refresh rate, etc., are more advantages. LED resolution generally lower, the price is also more expensive, because higher levels of integration.

Electric golf cars

In addition, Skyworth, MMS, TCL, Changhong TV and Andrews will be four major brands (Andriod) systems integration, creating a smart television era. Smart TV is currently favored by 80 people mainly.

Air Conditioning: A few years ago has been dominated the fixed-frequency air-conditioning, inverter air conditioner is now mainstream. Late last year, through the process with the fixed-frequency electrical inverter air conditioning air conditioning sales ratio is 5:5, while in the middle of this year, accounting for over Qi Cheng inverter air conditioner.

Refrigerator: environmentally friendly, and practical high-capacity refrigerator continued popular, regardless of door, three, six refrigerators, mostly equipped with computers, automatic temperature control system.

Washing machine: the liberation of the people’s hands out of the washing machine more user-friendly design, large capacity of up to 8 kg, is more suitable for home use, small capacity of only 1 to 2 kg, to meet business or personal needs.

Smart phone sales significantly exceeded non-smart phones

And four pieces of the traditional than the frequency of the upgrading of digital products more quickly.

Liu Wei, 3C digital products mainly to young consumers, the manufacturers had to develop digital develop more stylish, fresh new products. In the mobile phone market, smart mobile phone has become a hit. In the Tong Cheng Electric, the sales of smart phones has greatly exceeded the non-smart phones.

Previously, high above the price of laptop computers to many ordinary consumers alike, and now it has become a mass consumer goods. Tong Cheng Electric sales data, the main consumers of buying a laptop like both portable and stylish looking.